Ok Cheater free essay sample

Business organisations often use professional specialist agencies to help them produce an effective campaign that will achieve the promotional objectives. A good campaign must also use the right media. †¢Explain the role of advertising agencies in the development of a successful promotional campaign. (P3). †¢Benefits of using professional advertising agencies (M2) †¢Explain the reasons behind the choice of media in a successful promotional campaign (P4) †¢Evaluate an existing national marketing campaign (D2) 2. Explain how professional advertising agencies can contribute to the promotional success of a selected product. (include in your answer a couple examples of the advertising used in the Orange Wednesday campaign (P3) 2. 2 Explain the advantages and disadvantages of using professional agencies in ensuring the promotional success. (Remember, not all advertising campaigns are successful and advertising agencies can significantly affect whether the campaign is successful or not. There a disadvantages to using an advertising agency, which need to be carefully considered) (M2) . We will write a custom essay sample on Ok Cheater or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page 3 Explain the general factors that have to be considered when selecting appropriate media for a successful. Evaluate fully an existing national marketing campaign. (Evaluation is about considering in detail the advantages and disadvantages of something and coming to conclusions as a result of this analysis. Was the campaign worth the effort? ) (D2) Task 4: YOUR OWN CAMPAIGN – PRESENTATION (P5 M3) Design a promotional campaign for a given product/service to meet the needs of a given campaign/creative brief (P5) †¢Provide a rationale for the promotional campaign (M3) Scenario: Due to large commitments at Red Agency you have been asked to participate in the creation and design of an ad campaign for a given product to meet the needs of a given campaign / creative brief. You also have a preference to pick which project to part take in You are required to choose 1 of the 3 situations from the campaign briefs stated below: A new cafe established to specialise in the sale of ethical food brands. The owner wants to attract customers that have a passion for the cause. The budget for the campaign is ? 8,000, required campaign length is 2 weeks during the launch of the business. -A successful health and fitness club is opening a new branch 5 minutes away from the Paddington campus of CWC. The owners have identified students at the college as target customers and are hoping to attract a large number of students to sign up for 25% discounted annual contracts.

Giant Bison Facts and Figures

Giant Bison Facts and Figures Name: Bison latifrons; also known as the Giant Bison Habitat: Plains and woodlands of North America Historical Epoch: Late Pleistocene (300,000-15,000 years ago) Size and Weight: Up to eight feet high and two tons Diet: Grass Distinguishing Characteristics: Large size; shaggy front legs; giant horns   About Bison Latifrons (the Giant Bison) Although they were certainly the best-known megafauna mammals of late Pleistocene North America, the Woolly Mammoth and American Mastodon werent the only giant plant-eaters of their day. There was also Bison latifrons, aka the Giant Bison, a direct ancestor of the modern bison, the males of which attained weights of close to two tons (the females were much smaller). The Giant Bison had equally giant horns - some preserved specimens span over six feet from end to end - though this grazer apparently didnt congregate in the giant herds characteristic of modern bison, preferring to roam the plains and woodlands in smaller family units. Why did the Giant Bison vanish from the scene at the cusp of the last Ice Age, about 15,000 years ago? The most likely explanation is that climate change impacted the availability of vegetation, and there simply wasnt enough food to sustain an extended population of one- and two-ton mammals. That theory is lent weight by subsequent events: the Giant Bison is believed to have evolved into the smaller Bison antiquus, which itself evolved into the even smaller Bison bison, which blackened the plains of North America until it was hunted to extinction by Native Americans and European colonists by the end of the 19th century.

Project writting Essay Example | Topics and Well Written Essays - 1000 words

Project writting - Essay Example some cases may be investigated after the outbreak which may result in failure to get appropriate information since other people thought to be involved would no longer be available which would result in getting skewed information with regards to the outbreak of the foodborne illness. The transmission patterns of the disease are often complex hence there would be need for getting detailed information that could be helpful in the determination of such outbreaks. As a result of language barriers or poor employee communication, it can also be difficult to get useful information that could be useful when attempting to determine the outbreak of foodborne diseases. It is often difficult to extract relevant information regarding the role of the food worker in the cause or spread of the outbreak. In some cases, other workers are employed on contract basis and are bound to shift from place to place hence it would be difficult to identify these and observe for symptoms in case of outbreak of disease. Workers are sometimes infected with agents such as norovirus, hepatitis A virus (HAV), salmonella and shigella for instance, hence there would be need to gather all the information that may be relevant. (i) The Brazilian case of multiple foods in which staphylococcus aureus is cited as agent where 2000 were hospitalised and 16 died could have easily been avoided if the prepared food was refrigerated to avoid contamination rather than leaving it at room temperature for a long period. (ii) An outbreak caused by fruit salad in California where hepatitis A virus is agent was responsible for 166 hospitalisations. This outbreak could have been avoided if measures were taken to relieve the ill person from duty until fully recovered. (iv) Salmonella Typhimurium caused an outbreak of diseases in Oregon as a result of intentional contamination of salad bars. This outbreak could have been avoided if all the bars were disinfected using detergents such as jik or other effective

Effective team performance Assignment Example | Topics and Well Written Essays - 2750 words

Effective team performance - Assignment Example Team building concepts like Belbin’s Team Roles, Myers-Griggs Group Dynamics, conflict resolution and decision making were experienced as the team progressed through team development stages of forming, norming and stroming as described by Tuckman’s Team Development Model (Tuckman 1965). The team was faced with a number of problems that occurred during its entire developmental process based on Tuckman’s model (Beyerlein and Johnson 2000). Although improved collaboration, effective communication and alignment of individual objectives with team objectives helped to overcome these problems, Kayes (2004) is of the opinion that these could have been prevented at the initial stages of the project. The project presented number of opportunities to the team to remain engaged in number of activities that played significant role in transforming the group into a cohesive and effective team. This report focuses on key stages in the development of a cohesive team and the proble ms and conflicts faced during the process and steps taken to resolve these issues. The report also discusses key theories and concepts of team development and significance of their application in practical life and analyzes the transformation of experiences in reflective learning. Problem and Context In this project, I formed part of a group that was entirely unknown to me and I had no earlier opportunity of working with them in similar circumstances. Due to this situation, I felt anxiety as I was totally confused about the group members, their behavior, said or unsaid protocols for group interaction and team objectives, as mentioned by Myers-Briggs (1998). Tuckman described it typical to the forming stage of the team development (Tuckman 1965). In forming stage, future of team and the team objectives are not much clear. Members try to know each other, exchange personal information and make friends that help them to better respond to pressure situation in future. But as I gained mor e opportunities to interact and know other members, the anxiety transformed into confidence to effectively communicate and participate in the group activities. During the project, many problems like motivation, individual capability, ineffective communication and team dynamics as highlighted by Kayes (2004) surfaced. Team members were not focused on team objectives and were frequently found busy in their social and personal issues at the initial stages of team development. The team members belonged to diverse cultural background that presented a potential source for diversity conflict (Goleman 2002). I believe that like me other group members being almost on the same parity had the similar experiences, as they were also shy and hesitant to communicate among each other at initial stages. Although these problems impeded task completion, team development, cohesion and improving collaboration and coordination among the members but these provided opportunities to respond effectively to a particular situation and progress towards team development (Chaney and Lyden 2000). McManus (2000) stresses that teams are stronger in commitment, cohesion and understanding of objectives than the groups. Therefore, skills like self-awareness, self management, competence, social awareness and relationship management highlighted by Goleman (2002) as Emotional Intelligence played a key role in bonding team together towards common goal. Despite all the

Relative resource manager (HRM) Essay Example | Topics and Well Written Essays - 1500 words

Relative resource manager (HRM) - Essay Example In context of the modern day businesses, human resources are also considered as one of the chief sources to reward a with company competitive benefits in the long run (Mathis & Jackson, 2011). It is in this context that preparation of reflective summaries or reflective logs can prove to be beneficial in identifying the strengths and weaknesses of a learner and further obtain a structured planning to utilize the skills obtained. With a similar view, I would intend to develop a reflective log based on my learning in relation to HRM practices. I would initially construct a brief description of my learning through the module and further depict my expectations and goals to implement the learning obtained in my professional career through the discussion henceforth. Learning Obtained from Coursework Based on my learning in this module, I can state that the principles of HRM attempt to specify human resources of any organisation as its asset and therefore, assist the leaders in directing the workforce towards a determined goal on the basis of shared values. It is in this context that various theorists have been arguing human resources to play a fundamental role in organisational success and thus, should be deal with efficiency in terms of its allocation. It is also regarded as one of the crucial managerial tools, which plays an effective role in implementing changes in relation to the policies of the company issues related with the deliverance of the product in an effective and productive way (Chandramohan, n.d.). As per my learning, for any organization to be successful, utilizing the skills of the human resource with cost effectiveness is quite significant. I have learnt that companies should be quite particular while recruiting human resources or manpower to contribute to the organisational success. HRM holds an important role in supervising the employees in any company. In this regard, I learnt that the doctrine of HRM encompass various range of activities includin g recruitments, appraisals, rewards and training facilities among others which are solely aimed at the development of employee productivity and organizational sustainability on the whole. It is in this context that being an HR manager is certainly not any easy task. Apart from monitoring each individual employee’s productivity and characteristics to manage them efficiently, HR managers also need to take into account various aspects such as the legal influences, employees’ requirements, their satisfaction, their development as well as similar other factors which tend to impose a direct impact on employees’ performances and thus, cause an effect on the overall organizational competencies (Vijayaragavan & Singh, n.d.; University of California, n.d.). It is very important for the companies now-a-days to develop its operations in a manner that will reward competitive advantages to it over the existing rivals companies. In this regard, HRM strategies play an imperativ e role by assisting with the systematic management of human resources in the company. Moreover, I have also learnt from my study that every individual as an employee always desire for equal compensation and benefits in accordance with their

Introduction To Bulk Carriers And Cargo Operations Engineering Essay

Introduction To Bulk Carriers And Cargo Operations Engineering Essay Introduction to Bulk Carriers Bulk Carriers are designed primarily for the transportation of solid bulk cargoes. Leading bulk cargoes are coal, iron ore, phosphate, nitrate and grains such as wheat. The carriage of cargo in bulk reduces packaging costs and loading and unloading operations can be speeded up.  In many cases bulk cargoes are found in countries away from where they are required. Bulk carriers are built to various sizes and classified as Handymax/Panamax/Cape-sized bulkers etc. They also vary in types like geared bulkers, self-unloaders, combination carriers etc. Bulk carriers today form a high percentage of world trade. Bulk cargoes carried by them are subject to hazards because of which there are various codes in place for the safety of operating Bulk Carriers. They comprise of the BC Code, International Code for the Safe Carriage of Grain in Bulk (International Grain Code).   Like the original grain rules, the Code is to prevent the particular qualities of grain threatening the stability of ships when it is carried in bulk.  Ã‚   The revised BC Code deals with types of cargoes which may liquefy, materials which possess chemical hazards, and materials which fall into neither of these categories but may nevertheless pose other dangers.   The Code highlights dangers associated with certain types of cargoes giving information on their properties and how to handle them. Various test procedures are stated as well to determine properties of the cargo. The Code also lays importance on how cargoes should be properly distributed so as not to overstress the structure and maintain an adequate standard of stability. All bulk cargoes when loaded have an angle or repose which determines if the cargo is prone to shift. Unlike high dense cargoes such as iron ore cargoes like grain have a low angle of repose whereby the code states precautions to take so that the cargo movement does not affect the vessels stability. For cargoes with low angle of repose, the Code states that such cargoes should be trimmed reasonably and the holds should be filled fully as far as possible without resulting in excessive weight on the supporting structure. The  trimming also helps to cut oxidation by reducing the surface area exposed to the atmosphere thus preventing spontaneous combustion. The code states dangers related with different types of cargoes, like some cargoes are liable to oxidation where as others may emit toxic fumes without oxidation or when wet.   The code gives details of precautions that should be taken for these types of cargoes. The Code also gives details of the various sampling procedures and tests which should be used before transporting concentrates and similar materials and also recommended test procedures to be used by laboratories. A list of cargoes, which may liquefy is contained in appendix A to the Code, while appendix B gives an extensive list of materials possessing chemical hazards.   Appendix C deals with bulk cargoes which are neither liable to liquefy nor possess chemical hazards.   More detailed information concerning test procedures, associated apparatus and standards, which are referred to in the Code are contained in appendix D.   Emergency Schedules for those materials listed in appendix B are contained in appendix E.   Recommendations for entering cargo spaces, tanks, pump rooms, fuel tanks and similar enclosed compartments are shown in appendix F.   Procedures for gas monitoring of coal cargoes are contained in appendix G. Works Cited Isbester, J (1993), Bulk Carrier Practice IMO, (2004), BC Code Ship/Shore Safety checklist for loading or unloading dry bulk cargo carriers Dateà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Portà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Terminal/Quayà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Available depth of water in berthà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦..Minimum air draughtà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Ships nameà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Arrival draught (read/calculated)à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Air draughtà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦..à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Calculated departure draughtà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦..Air draughtà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦..à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. The master and terminal manager, or their representatives, should complete the checklist jointly. Advice on points to be considered is given in the accompanying guidelines. The safety of operations requires that all questions should be answered affirmatively and the boxes ticked. If this is not possible, the reason should be given, and agreement reached upon precautions should be taken between ship and terminal. If a question is considered to be not applicable write N/A, explaining why if appropriate. SHIP TERMINAL Is the depth of the water at the berth, And the air draught, adequate for the Cargo operations to be completed? Are mooring operations adequate for all local effects of tide, current, Weather, traffic and craft alongside? In emergency, is the ship able to leave the berth at any time? Is there safe access between the Ship and the wharf? Tended by ship/terminalà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ (cross out as appropriate) Is the agreed ship or terminal communications system operative? Communication methodà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ Languageà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ Radio channels/phone numbersà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. SHIP TERMINAL Are the liaison contact persons during operations positively identified? Ship contact personsà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ Shore contact person(s)à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Locationà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Are adequate crew on board, and adequate staff in the terminal, for emergency? Have any bunkering operations been advised and agreed? Have any intended repairs to wharf or ship whilst alongside been advised and agreed? Has a procedure for reporting and recording damage from cargo operations been agreed? Has the ship been provided with copies of port and terminal regulations, including safety and pollution requirements and details of emergency services? Has the shipper provided the master with the properties of the cargo in accordance with the requirements of chapter VI of SOLAS? 13. Is the atmosphere safe in holds and enclosed spaces to which access may be required, have fumigated cargoes been identified, and has the need for monitoring of atmosphere been agreed by ship and terminal? Have the cargo handling capacity and any limits of travel for each Loader/unloader been passed to the ship/terminal? Loaderà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Loaderà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Loaderà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Has a cargo loading or unloading plan been calculated for all stages of loading /deballasting or unloading/ballasting? Copy lodged withà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ SHIP TERMINAL Have the holds to be worked been clearly identified in the loading or unloading plan, showing the sequence of work, and the grade and tonnage of cargo to be transferred each time the hold is worked? Has the need for trimming of cargo in the holds been discussed, and have the methods and extent been agreed? Do both ship and terminal understand and accept that if the ballast programme becomes out of step with the cargo operation, it will be necessary to suspend cargo operation until the ballast operation has caught up? Have the intended procedure for removing cargo residues lodged in the holds while unloading, been explained to the ship and accepted? 20. Have the procedures to adjust the final trim of the loading ship been decided and agreed? Tonnage held by the terminal conveyer systemà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ Has the terminal been advised of the time required for the ship to prepare for sea, on completion of cargo work? THE ABOVE HAS BEEN AGREED: Timeà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ Dateà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ For shipà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. For terminalà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Rankà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. Position/Titleà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Works Cited IMO, (1998), BLU Code, pp.22-25 GYPSUM A natural hydrated calcium sulphate. Insoluble in water. It is loaded as a fine powder that aggregates into lumps. Average moisture content is 1% to 2%. Characteristics Angle of repose Bulk density(kg/m3) St. Factor (m3) N.A. 1282 to 1493 0.67 to 0.78 Size Class Group Up to 100mm N.A. C Hazard: No special hazard. This cargo is non-combustible or has a low fire-risk. Hold cleanliness: No special requirement. Weather precautions: This cargo is to be kept as dry as possible. It shall not be handled during precipitation. All non working holds in which the cargo is loaded or to be loaded to be kept closed. Loading: Trim in accordance with sections 4 5 of the IMSBC CODE. Precautions: No special requirements. Ventilation: No special requirements. Carriage: No special requirements. Discharge: No special requirements. Clean up: Prior to washing of this cargo, decks and cargo spaces should be shovelled and swept clean because washing of the cargo is difficult. Loaded voyage Hatch covers should be secured battened down for sea and water tight. Booby hatches holds ventilation flaps to be secured and should be water tight. Works Cited (2009), IMSBC Code, pp. 176 Information Provided by Shipper Prior to loading of any cargo the shipper provides the master with information necessary for the safe planning and supervision of loading of the cargo. A declaration is made by the shipper related to the cargo in compliance with the recommendation of the BC Code. Along with the MSDS, information provided consists of: Shippers name Reference numbers Consignee Description of cargo (type of material/particle size etc.) Stowage factor Specification of cargo (IMO class, Ems No. Etc.) Angle of repose Chemical properties Relevant special properties of cargo Additional certificates, if required such as TML and moisture content, exemption certificate etc. Works Cited IMO, (1998) BLU Code, pp. 32 MSDS FOR GYPSUM 1. Product Identification Synonyms: Alabaster, Gypsum stone, Land plaster, Calcium Sulfate Dihydrate, Native calcium sulphate. CAS No.: 13397-24-5 2. Composition/Information on Ingredients Ingredient CAS No Percent Hazardous Gypsum 13397-24-5 90 99% No 3. Hazards Identification Toxic Harmful by inhalation (contains crystalline silica). Mineral Formulae: CaSo42H2O Emergency Overview It is an off white, odourless powder. It is not combustible or explosive. Short term exposure to the powder poses no hazard. Potential Health Effects - Inhalation: May causes irritation to the respiratory tract and choking depending on the degree of exposure. Ingestion: Do not ingest. Small quantities are not known to be harmful but large quantities can cause an obstruction causing pain in the digestive tract. Skin Contact: May cause irritation, dry skin and discomfort. Eye Contact: May cause immediate or delayed irritation or inflammation. With large amounts it can cause eye irritation, redness. Eye exposure requires immediate first aid. Chronic Exposure (inhalation): The product contains crystalline silica which with prolonged or repeated inhalation can cause disabling and fatal lung disease. Silicosis (prolonged inhalation of crystalline silica) increases risk of tuberculosis. Some studies show an increased incidence of chronic kidney disease and end stage renal disease in workers exposed to respirable crystalline silica. Medical Conditions aggravated by exposure: Individuals with lung disease can cause aggregation by exposure. 4. First Aid Measures Inhalation: Remove to fresh air. Seek medical attention for discomfort or if coughing. Ingestion: Do not induce vomiting .If conscious have person drink plenty of water. Get medical attention. Skin Contact: Wash with cool water and mild skin detergent. Seek medical attention for rash, irritation and prolonged unprotected exposure to wet gypsum. Eye Contact: Immediately flush eyes with water for at least 15 minutes, including lower eyelids. Seek medical attention for abrasions and burns. 5. Fire Fighting Measures Fire: Poses no fire related hazard. General Hazard: Avoid breathing dust. Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Fire fighting Equipment: A SCBA is recommended to limit exposures to combustion products when fighting any fire. 6. Accidental Release Measures. Put spilled material in a container. Avoid actions causing it to become airborne. Avoid inhalation and contact with skin. Wear appropriate PPE at all times. Do not wash gypsum down sewage and drainage systems. 7. Handling and Storage General: Keep bulk gypsum dry until used. Engulfment hazard. To prevent burial or suffocation, do not enter confined space. Gypsum can build up or adhere to walls of confined space. It can release or fall unexpectedly. Do not stand on stockpiles of gypsum, they may be unstable. Usage: Cutting, crushing, sanding or other crystalline silica bearing materials will release respirable crystalline silica. Housekeeping: Avoid actions causing the gypsum to become airborne during clean up. Use all appropriate measures of dust control or suppression. Clothing: Promptly remove and launder clothing that is dusty or wet with gypsum. Wash skin after exposure to gypsum. 8. Exposure Controls/Personal Protection Engineering Controls: Use local exhaust or other suppression methods to maintain dust levels. Skin Protection: Wear protective gloves, boot covers and clean body-covering clothing. Remove clothing and protective equipment that becomes saturated with wet gypsum and wash exposed areas. Eye Protection: Wear approved safety goggles when handling dust or wet gypsum to prevent contact with eyes. Wearing contact lenses under dust conditions is not recommended. Respiratory Protection: Under ordinary conditions no respiratory protection is required. Wear a approved respirator when exposed to dust above exposure limits. 9. Physical and Chemical Properties Appearance: White or off-white powder. Odour: None Solubility in water: Negligible Specific Gravity: 2.3 g/cm3 pH: 5-8 Boiling Point: >1000 C Freezing Point: None, solid Vapour Density NA. Vapour Pressure NA. Evaporation Rate NA. 10. Stability and Reactivity Stability: Stable. Avoid contact with incompatible materials. Hazardous Decomposition: Decomposes to sulphur oxide and calcium oxide above 1450 C Hazardous Polymerization: None. Incompatibilities: Gypsum is incompatible with acids. It contains silicates which may react with powerful oxidizers such as fluorine, chlorine trifluoride and oxygen difluoride. 11 and 12. Toxicological and Ecological Information Refer to contact information provided. 13. Disposal Considerations Dispose of waste and containers in compliance with applicable Federal, state, provincial and local regulations. Works Cited www.lafarge-na.com (Accessed: 16 November 2010) PREPARATION OF HOLDS On completion of discharge the mate decides on the procedure for cleaning of the holds on basis of time, manpower and next cargo to be loaded. Some cargoes require certain precautions in relation to cleaning of the holds. Gypsum on the other had requires no special preparation. Prior to commencement of cleaning it should be ensured that minimum amount of cargo is left behind by the stevedores. In the early stages of discharge of cargo like wheat when there are interruptions crew members can be sent into the hold to clean positions high under the deck head which will not be accessible during the later stages. This should only be done when there is no cargo working in the hold and it has been ascertained that there is no risk to the crew members. Before commencing work it should be ensured the cargo space is fully ventilated and a Permit to Work obtained. All crew to have proper PPE and safety equipment. The holds are to be swept prior washing in a manner whereby creating minimum dust clouds. The bilges should be checked so that no cargo has gotten in to them and if required get out the cargo before the completion of discharge. The stevedores should be requested to remove the sweepings gathered by the crew. If for reasons it is not possible it should then be stored in drums and kept ready for lifting by the ships cranes. When it is clear and permissible(taking account of the weather) to use the ships cranes the sweepings should be hoisted from the holds and stored on deck until such time when it would be possible to tip it overboard. Washing of holds is carried out by using sea water .Hand held hoses are used for this along with a water cannon. This combination uses compressed air to inject more pressure into the water from the mains. This provides a powerful jet which helps in better cleaning reaches high extremities of the holds. The washing sequence starts at the top of the holds and works down towards. Simultaneously a separate party of seamen will wash the hatch covers and comings with the help of hand held hoses. During this process the water should not be allowed to accumulate on the tank top. The bilges should be run continuously. A slight list to either side and maintaining a stern trim is the most effective method to aid in washing. Communication should be maintained with the bridge or the cargo control room to aid with the above. Once the higher extremities of the holds are washed the tank top is then hosed down to wash off the cargo residue and any dirt. The sounding pipes should also be flushed during washing as neglect of this over time causes the pipes to become blocked. When the salt water washing is complete traces of salt remain on the surface of the hold. If this is allowed to remain it helps in corrosion and is also not acceptable by most surveyors which is why the holds should be rinsed with fresh water. This rinsing also aids in accelerating the drying process. The drying of holds is usually carried out by natural ventilation, time permitting. If vessel is at sea and the waters are relatively calm the hatches can be opened up to speed up the process. The puddles formed by depressions in the tank top are sponged or mopped up by the crew. The water accumulated between the manhole surface and the lid will also have to be dried. The hold bilges should be drained of the unpumpable water, cleaned along with the strum boxes and then dried as well. Once the holds have dried an inspection should be carried out. Loose rust scales if found should be scrapped and cleared. Look for any cargo residue which may be spotted from the hold ladder high up. Bulk heads, tank tops are clean to touch. Look for any residues beneath manhole cover plates and behind pipes. Outlets for the CO2 system should be checked to ensure they are not blocked. If time permits DB tanks can be pressed up to check for any leakages in the holds. Holds to be also checked for damages in case they were missed out during discharge and if found recorded. Also if any maintenance as per the PMS or repair work needs to be carried out should be attended to, time permitting and recorded. A chalk test or a hose test can be carried out to check the water tight integrity of the hatch covers and any repairs if required and then logged. The final preparation would consist of resealing the manhole covers with duct tape. The bilge plate should be bur lapped and replaced to prevent the cargo from falling into the bilge. This system also allows the water to drain in the bilge. In the hold used for heavy weather ballast the gaskets along with the bolting of the watertight cover plate over the ballast suction should be checked. Works Cited South Tyneside College Notes. Isbester, J (1993), Bulk Carrier Practice HAZARDS ASSOCIATING WHEAT GYPSUM PRECAUTIONS Wheat: Is capable of self combustion due the gases given off. Dust is a major factor as it can affect personnel on deck with regard to respiration and cause irritation if it goes into the eyes. On exposure to wheat dust, personnel may also suffer from wheat rash. It can also affect the ships ventilation system if proper filters are not in place. The free flowing characteristics can reduce stability of a vessel caused by free surface effect (in partially filled holds) similar to liquids in partially filled tanks. Due to movement of the vessel the wheat is likely to shift to a side causing a list or even a possibility of capsizing the vessel. In cases where wheat requires fumigation in the form of pellets, gases or sprays all personnel to be made aware of the poisonous characteristics they pose and precautions to be taken. Precautions: All personnel on deck during cargo operations to be donned with proper PPE at all times, including disposable dust masks and safety goggles. Loading to be carried out as low as possible in holds to minimise dust. Wheat cargo has to be kept dry at all times and any form of water ingress has to be avoided to prevent damage to the cargo. As far as possible wheat should be avoided being loaded by partially filling holds. Where a vessel has partially filled holds she should be trimmed level in order to prevent shift of cargo. The surface of the partially filled holds should be secured by approved methods as mentioned in the IMO-grain rules. These methods used are strapping, lashing, saucering, over stowing and securing with wire mesh. In case fumigation is to be carried out on board the master is to be provided about details and precautions to be taken. The spaces to be fumigated have to have warning signs displayed. It is to be carried out by competent shore personnel. In cases where ships staffs presence is required during this operation, it has to be ensured that adequate respiratory protection is worn. Ventilation is required to a great extent to prevent condensation and removal of heat. The total weight of wheat should not exceed one-third of the ships deadweight. GM of 0.30 meters to be maintained or as given by formulae in the BC Code, whichever is greater. During discharge precautions to be taken by stevedores when using hydraulic equipment and grabs so that oil from such equipment does not damage the cargo. Gypsum: This type of cargo is generally not classified as a hazardous cargo. Airborne dust may cause irritation or inflammation to eyes. It could be harmful by inhalation depending on the level and duration of exposure as it contains crystalline silica. It could also cause skin discomfort to a certain level. It poses an engulfment hazard are personnel are advised not to stand on stock piles. It can also adhere to walls and can collapse and fall unexpectedly. Precautions: All personnel on deck during cargo operations to be donned with proper PPE at all times, including disposable dust masks and approved safety goggles. Actions to be avoided which can cause gypsum to become airborne. Bulk gypsum is to be kept dry until used as it tends to cake when in contact with water. It is recommended not to wash gypsum down sewage and drainage systems. Works Cited www.lafarge-na.com (Accessed: 16 November 2010) South Tyneside college notes MCA, MGN 284 (M+F) Swadi, D (2nd Edtn.), Cargo Notes IMO, International Grain Code LIFTING PLANT In order to have any equipment or machinery working effectively on board vessels a Planned Maintenance System should be in place and in effect. From an inspection of this maintenance record it is easy to keep track of details like when was the maintenance done last, what was done, when is it due next, what materials are required, how many man hours etc. The reason for this planning is so that we have the necessary tools, spares and consumables on board in advance prior to undertaking maintenance. The basic requirements of lifting plants are:- To keep the equipment in safe and good working order To maintain supporting documentation for the above. The main aspects of lifting plant maintenance are: Routine Inspection and Maintenance In addition to statutory inspections routine inspections are to be carried out by a competent person to asses if the plant is safe for continued use looking for problems like: Cracking at welds. Damaged/Missing grease nipples. Hydraulic oil leakage from motors. Worn or damaged wires. Corrosion. Missing markings. Lack of greasing and oiling. Defects to structure and fittings. Swivels that may not be rotating freely. Loose connection and gap between rails. All maintenance is carried out as per manufacturers instructions which also specify the time period (e.g. Weekly, monthly, yearly and before and after use).Prior to operation all control units, alarms, limit switches and joysticks should be operated and checked. If the plant is in regular use checks required by the external surveys should be done more by ships competent staff more often than once a year, even thou regulations require only an annual survey. Operation by Trained Personnel All vessels lifting plant should be operated by trained and certified personnel to avoid damages and improper use of the equipment. Trained personnel should also be appointed to direct the plant operator using approved hand signals as contained in COSWP. Testing Of Lifting Plant As per the manufacturers instructions the testing and certification of the lifting plant should be carried out at maximum intervals of 5 years. This testing is initially carried out after manufacture and installation of the plant at the ship yard under supervision of a competent person from the ship yard. The test is carried out using an approved proof load exceeding the SWL as specified under the merchant shipping regulations. This test is also required to be carried out if: Any repairs or modifications have been done which is likely to affect the SWL or the strength or stability of the equipment. Prior using any crane which has been idle for more than 6 months If it has been involved in an accident or mishap. Rigging Plan The rigging plans should be available at times along with sufficient technical details like: SWL of all fittings A means of identification Boom limiting angles Instructions for replacing wires and sheaves Dismantling procedures Erection procedures Certification and reports The master is to ensure that a certificate is on board within 28 days of a statutory test or examination for at least 2 years following receipt of next certificate. They are to be kept readily available on board for any dock worker using the ships plant. A register of lifting appliances along with items of loose gear are also kept on board. Works Cited Swadi, D (2009), Cargo Notes Dickie Short, Crane Hand book

Instructional Communication Essay

Instructional Communication Instructional Communication can be best explained as the transfer of information in a teaching environment. There are a lot of aspects that is associated with Instructional Communication. The contexts that are most relevant to my career are teacher to teacher communication, teacher to student communication, comprehension of information, and technology used in the setting. These four aspects make up my career as a public affairs instructor for the Department of Defense. Instructional communication is very important to the field of communication. Instructional communication is implemented everyday all around the world. It is implemented in schools and in job settings. This type of communication is how we relate information to new people on the job or students in a classroom. In order to determine the depth of comprehension we have to analyze formal and summative assessments of the students. During the course that I instruct, we also use technology to convey information as well as have the students to use technology to complete projects that are due during the course. Instructional communication has several different contexts located within it. I feel that the most important context would be teacher to student communication. It is extremely important as a teacher or an instructor to be able to convey the information to your audience and them be able to comprehend what you are talking about. It is also very important that students ask questions or talk about the material that is being covered to show understanding. According to Karaduz, (Karaduz, 2010) â€Å"An important part of instructional services involves giving messages to students about how they should learn and become involved in the learning process, giving those stimuli for reinforcement, identifying the gaps in their learning, and amending these gaps. An effective instructional process thus requires strong communication skills along every step. It is through language that a healthy communication is established, student interest is aroused, and ways of comprehending, practicing and retaining information are clarified. Karaduz said a lot in these few sentences. He talked about how important communication is between student and teachers. What good do teachers do when the students cannot understand the teacher’s message? Teacher and student communication is so important in any instructional setting. The next most important part of instructional communication is teacher to teacher communication. It is handy to have colleagues that you can ask questions or get advice about certain criteria. I have worked as a public affairs person for the last seven years. Of that seven years 2 ? of them has been in a combat area. In this intense atmosphere I have learned pretty much everything that I teach my students at the Defense Information School. A lot of times other instructors come to me for information on what should happen in a certain situation in a combat area. I think that teacher to teacher communication is extremely valuable and you should take a advantage of it. According to Lance (Lance, 2010), â€Å"when administrators value collaboration between teacher-librarians and classroom teachers and when teacher-librarians and their classroom colleagues report that it happens more frequently, students are more likely to master ICT standards and more likely to earn advanced scores on state reading and language arts tests. † This study linked collaboration between faculty and students scores. Lance showed that when faculty collaborated on instructional information and objectives the student’s scores went up on formal assessments. Another context of instructional communication is comprehension assessment. As an instructor I have to assess the students learning to see if they have learned the specific objectives to move on to the next part of the course. If students do not meet those objectives then they fail and are recycled to another program. I use different kinds of assessments to check the depth of their knowledge of the material. The students have written assignments, formal assessments, and a Field Training Exercise (FTX). The students also have time to redo any work that they have failed in order to receive a better grade. I provide feedback within two days of the after the due date of the assignment. I provide feedback and remedial for any student that is deemed in need or feels that they need the extra help. Since we try to communicate very well with the students our fail rate is between 2 to 4% each course. Technology is the last item that is very important to instructional communication. â€Å"Based on the immersive interface that underlies virtual worlds such as Second Life and World of Warcraft, virtual environments allow the enactment of complex situations with tacit clues, imulation of scientific instruments, virtual experimentation, simulated collaboration in a team, and adaptive responses to students’ choice—all captured and recorded in data streams (Clarke-Midura, 2010),† according to Jody Clarke-Midura and Chris Dede. In this century technology has advanced so much. We have social media sites, PowerPoint presentations, email, and other was to communicate in and out of t he classroom. I learned that when you do not have proper communication things tend to follow apart.

Education and Poverty Essay

How College Admissions Favor Wealthy Students Over Underprivileged Minorities The growing debate over whether college admissions are partial by overstressing standardized tests and GPA has become a very controversial topic in the realm of education. Numerous students argue that the admission process is unfair in placing a greater emphasis on certain stressed requirements, such as the ACT/SAT, while neglecting to examine the whole applicant. Those who argue against the admission policy believe that each student in the United States comes from a very diverse background, and each application should be looked into with intricacy, rather than regarding just their requirements. Although those requirements are generally what the admission people look for in what they perceive as a quality student, those who argue against it feel that it is best not to overlook a student who overcame tremendous adversity, but just may have needed a point or two to get admitted. The central argument against c ollege admissions has to do with whether challenging life conditions outside of school, for a student who is economically disadvantaged, should be weighted more than the slightly higher grade of a student with a different socioeconomic background in college admissions. In some cases, high school students must work full-time in order to support their families. If a college had to choose between a student who did not need to support his or her family and got a 33 on his or her ACT, and another student with a 29 on their ACT who worked almost full-time to support a family, which would be more likely to get accepted into an Ivy League college if both students had the same 4.0 GPA, classes, and amount of important clubs, etc.? Odds are, the one with the higher ACT will get selected, and those who debate the issue feel that this is where it becomes inequitable. Students argue that working over thirty hours per week while taking the same challenging classes classes shows better work ethic than a student who has an extra thirty hours a week to study. There are a variety of refugees and immigrants who fled their homelands because of jobs, famines, wars, or particular life threatening circumstances, with very  little resources to bring with them. For this reason, it is very difficult for them to absorb the opportunities that well-settled students have. This includes private schooling, tutors, standardized test practices, etc. This gives domestic affluent students a better chance to succeed, due to better overall educational opportunities. The education at a private school is superior to that of a public school because of higher set standards and a very well disciplined system. In Teaching With Poverty In Mind, author Eric Jensen exemplifies a chart indicating that family income correlates significantly with children’s academic success (10). For poor students, a negative correlation is drawn with absenteeism, the factor that most closely relates to dropout rate. For tests like the ACT and SAT, deprived minorities are at the disadvantage because English would be their second language. Some think that most colleges overlook several variables that determine a student’s mental capacity. That is why some educators debate that their needs to be more of a holistic approach because sometimes, a certain factor can stunt a student success, when they may have the abilities to become the next Einstein. The economic value of a particular place or education is how willing a family is to relocate to provide their childr en with higher education potential; this can be measured by the pricing of housing. Majority of migrant families do not have the ability to relocate and provide better education for their children, meaning that they have to accept being in poverty and not having a strong educational background (Paleso 3). The SAT has frequently been criticized for providing a cultural advantage for â€Å"wealthy whites.† In the website article, â€Å"SAT Racial Bias Proves Standardized Tests Are Geared Toward White Students,† Haleigh Collins states that tests like the ACT and SAT have been blamed for widening the achievement gap between whites and minorities. While the math section is objective, the critical reading section and writing section describe topics associated mostly with the white demographic. Often the passages are about subjects that white, upper class students are more exposed to. The verbal section favors white students by using language with which they are more familiar than non-white students. Collins also mentions that for 23 years Roy Freedle, a psyc hologist who works with ETS (the nonprofit â€Å"Educational Testing Service† that develops, administers, and scores standardized tests), has been working to prove that these emphasized ACT and SAT tests give  whites an unfair advantage. His studies show that minority scores significantly lag when compared to whites of equal economic status. As mentioned above, wealthier test takers benefit from being able to afford tutors that cost up to hundreds of dollars an hour to private college counselors; students with means and access to additional help can often bring their scores up significantly. For example, several students see a great increase in their scores after practicing these tests and taking them over and over. Just through coaching and exposure to the tests, they start seeing trends, which enable them to do a lot better. Students who can’t afford or don’t have access to this are at a huge disadvantage. Unfortunately, situations such as this occur often. John Overton High School student Amad Amedy, a full time worker and athlete with an ACT composite score of 29 and a 3.9 GPA, stated that he felt college admissions are crooked. He believed that a underprivileged student who works full time and is more active in after-school clubs and sports should be weighted equally, if not higher, than a student who has just decided to focus and do well in school only, especially if they are not that much more accomplished than the working, social student. He discussed that sometimes students get home late from work and do not have time to study because they need to sleep in order to wake up and take an important test in the morning. Amedy concluded by saying that a well-rounded student will use his extensive knowledge of various trades that he picked up from experience to get further than someone who just stays at home and studies, and that the social and vocational skills earned by working and engaging in extracurricular activities are as valuable as the intellect gained from studying textbooks and researching academic journals. Another John Overton High School student, Benjamin Demonbreun, who is an unemployed student, salutatorian, and National Merit Semifinalist, with a 33 composite on the ACT and a GPA of 4.0, strongly disagreed with Amedy. Ben believed that the standard requirements were a good way to determine who should be accepted into prestigious universities. He argued that students such as himself worked extremely hard, da y in and day out, in what they have needed to do, which is get exceptional grades. Alongside Benjamin, students contest that although they may have had a slightly greater advantage, it does not mean that students such as Amedy have worked harder than them or deserve it more, solely because they do a  few things outside of school. Ben discussed that he has never needed to support a family; school has always been his priority. He believes that emphasis on standardized tests and GPA should not be dismissed by any means because they are a huge determining factor for work ethic, knowledge, and college readiness. In Teaching With Poverty In Mind, Jensen illustrates a few action steps such as more empathy towards the life of a migrant student (11). This better understanding may allow for a more lax curriculum that allows the student some wiggle room. Such steps are seen in MNPS with a new grading policy allowing retakes until students achieve mastery. A few universities have started to become familiar with this situation, due to growth in immigrant populations in the Un ited States. There have been some universities who have abandoned SAT and ACT scores as a means of selection. A growing amount of selective universities, predominantly Ivy League, are beginning to adopt a holistic admissions policy because the holistic approach is very thorough in evaluating the whole of the applicant, rather than reduce the applicant to a few pieces of empirical data, such as test scores and GPA. The holistic policy offers students a chance to show their accomplishments in several distinct ways, rather than only test scores and grade histories, giving people such as Amedy an opportunity to attend a high-status university and receive a wonderful education. With this policy we may see minorities provide a different perspective in different professions that help advance society and technology. Works Cited Amedy, Amad. Personal Interview. 5 April 2014. Collins, Haleigh. â€Å"SAT Racial Bias Proves Standardized Tests Are Geared Toward White Students†. PolicyMic. 12 September 2011. Web. 1 April 2014. Demonbreun, Benjamin. Personal Interview. 5 April 2014. Freedle, Roy. Interview. 1 April 2014. Jensen, Eric. Teaching With Poverty In Mind. 2009. EBook’s (10-11), Web. 8 April 2014. Polese, Mario. The Wealth And Poverty Of Regions: Why Cities Matter. 2009. EBook’s (3). Web. 13 April 2014.

Xpresso Lube’s service package Essay Essays

Xpresso Lube’s service package Essay Essays Xpresso Lube’s service package Essay Paper Xpresso Lube’s service package Essay Paper 1. Describe the Xpresso Lube’s service bundle?Xpresso Lube’s service bundle being alone and first of its sort provides assorted other services other than lube oil alteration. It provides for a scope of javas. a waiting country with good insides. music system and reading stuff appealing to different involvements. In the nucleus country of operations ( lube oil alteration ) . Xpresso provides an chance to the clients to see an anomalousness found in their auto. It besides provided transit installation to clients. 2. How are the typical features of a service operation illustrated by Xpresso Lube?The typical features of service operation illustrated by Xpresso Lube are as given below: ( a ) Emphasis was laid on client experience at the service station. ( B ) Comfortable waiting suites. java and music highlighted the aesthetics aspect ( degree Celsius ) Employed lifts alternatively of cavities to ease the clients holding a expression at the jobs in their autos ( vitamin D ) Provided transit which ensured that the clients were non worried about their commutation while their auto was being serviced ( vitamin E ) The clients were presented with right facts and honestness on portion of the station was paramount. 4. What elements of Xpresso Lube’s location contribute to its success? The assorted geographical factors which contribute to Xpresso Lubes success are: 1. A thriving concern community2. Xpresso Lube’s location on a chief street near the university attracts a wide spectrum of clients3. Close propinquity of Xpresso Lube to local stores where people can see while their autos are being serviced. 5. Given the illustration of Xpresso Lube. what other services could be combined to â€Å"add value† for the client?

How Cell Phones Work Essay Essay Example

How Cell Phones Work Essay Essay Example How Cell Phones Work Essay Essay How Cell Phones Work Essay Essay Essay Topic: Zone One Cell phones are really interesting! Have you of all time wondered how a cell phone plants? Well we have. Cell phones have changed a batch since 1984. The first cell phone that came out was called the Dyna TAC8000X. ( top left ) It weighed 2 lbs! The brick merely offered a 30 minutes of talk clip for every charge. You could acquire this astonishing device for $ 3. 994! The adult male who invented this phone is Ruby Knopp. ( top left ) He besides invented the newer modern Motorola Razor. ( top center ) Some of the new cell phones provide an unbelievable sum of maps. like: shop contact information. do undertakings or to-do lists. maintain path of assignments and set reminders. utilize the constitutional reckoner for simple math. send and receive electronic mails. cyberspace. play games. ticker Television. send and receive text messages. incorporate other devices such as PDA’s. MP3 participants. and GPS receiving systems. One of the most interesting things about a cell phone is th at it is really a wireless. an highly sophisticated wireless. The adult male who invented the telephone was Alexander Graham Bell ( top right ) in 1876. Wireless communicating can follow its roots to the innovation of the wireless by Nikolai Telsa in the 1880s. When these two great engineerings are combined it made the cell phone. Peoples who needed mobile-communication devices had wireless telephones in their autos. In the radio-telephone systems. there was one cardinal aerial tower per metropolis. and possibly 25 channels available on the tower. In your auto you needed a powerful sender. Not everyone could hold a wireless telephone because there were merely 25 channels available per metropolis. Each cell phone has a cellular system. A cellular system is a division of a metropolis into little cells. Each cell has a base station that consists of a tower and a little edifice incorporating the wireless equipment this allows widespread frequence reuse across a metropolis. so that 1000000s of people can utilize cell phones all at one time. Each cell is typically sized at and screens about a 10 square stat mis radius. There is a demand to hold big figure of base Stationss in a metropolis of any size to do cell phone usage map handily. A typical metropolis can hold 100s of towers placed in certain parts to cover most of the countries wholly. Cardinal offices called the Mobile Telephone Switching Office ( MTSO ) handles all of the phone connexions to the normal-based phone system. and controls all of the base Stationss in the part. Each bearer in each metropolis runs a MTSO. All call phones have codifications related to them. The codifications are used to place the phones proprietor. phone. and the service supplier that they use. When a individual foremost turns on their phone it listens for a System Identification Code ( SID ) on the control panel. A SID is a alone 5-digit figure that is assigned to each bearer by the FCC. This is a alone frequence that the phone is based on. When you receive or do a call foremost. your cell phone radios the nearest tower. Next. a wire or fiber ocular line carries the call down to the wireless entree point connected to a multi-port switch. Then the call ( along with many others ) g ets routed to a back draw – normally down to an belowground wire T1 or T3 line. but sometimes back up the mast to a powerful line-of-sight radio microwave aerial ( typically merely used either when there isn’t a land connexion. or when the land connexion is poor. ) The incoming call or information comes back from the dorsum draw and up through the switch to the aerial. where it so hits your phone. If you are traveling. so there is a manus off – a new but more or less indistinguishable cell site transmits the informations to your phone. one time your phone cheque in. The benefits of holding a cell phone is you can hold long distance phone calls anyplace you are every bit long as you are in rang of a tower. Cell phones are great for exigencies. They have 911 panic buttons and GPS locations to happen person that is losing and has a GPS locater on their cell phone. Besides if your in a terror and cant acquire your phone to type 911. most phones have a 911 panic button and it will name for aid. For concern people. the advantages are eternal because cell phones have cyberspace. Besides being able to reach associates and clients is of import in all state of affairss. Important issues can be solved at anytime. regardless of clip zones and locations. Besides cell phones can be used as legal grounds criterions. Cell phones and their records have been used in tribunal suites as grounds. and are besides used be jurisprudence enforcement officers and research workers for entering and grounds. The disadvantages of holding a cell phone is they cost a batch. They can run from $ 40 to over $ 300. You can besides hold extra costs for apps. music. games. and many more things. The lone manner of acquiring out of your cell phone program is to pay a expiration fee of A ; 150 or more. Cell phones can be large distractions. They can pealing during a film. music concerts. dramas and other countries where silence is required. Besides during driving. because cell phone usage while driving has caused so many accidents that five provinces had banned calls while driving and 12 provinces had prohibited text messaging while driving. 21 States had prohibited any usage of cell phones while driving ( except for exigencies ) including Washington province. Cell phones can besides hold deficiency of privateness because cell phones provide no audio feedback through the ear piece. Some people talk much louder with cell phones so they do on land lines. This exposes the people around them to their conversations. Cell phones emit low degrees of RF ( radio frequence ) radiation. Large sums of this energy can heat and damage tissue. particularly around the eyes and testiss. which do non hold plenty blood flow to transport away such heat. This is besides concern that cell phones might do malignant neoplastic disease. concerns. kiping jobs. and memory loss. Brian. Marshall. â€Å"How Cell Phones Work. † HowStuffWorks – Learn How Everything Works! 2011. Web. 27 Jan. 2011. lt ; hypertext transfer protocol: //www. howstuffworks. com/cell-phone. htm gt ; . â€Å"Cell Phone and Wireless Service Planing Guide. † Cell Phone and Wireless Service Plan Buying Guide. 2010. Web. 27 Jan. 2011. lt ; hypertext transfer protocol: //wirelessguide. org/basics/benefits. php gt ; . â€Å"Disadvantages of Cell Phones. † EHow | How To Make Merely About Everything! | How To Videos A ; Articles. 14 Apr. 2010. Web. 27 Jan. 2011. lt ; hypertext transfer protocol: //www. ehow. com/about_5050396_disadvantages-cell-phones. hypertext markup language gt ; . â€Å"How Cell Phones Work. † Cell Phones. 2008. Web. 27 Jan. 2011. lt ; hypertext transfer protocol: //cellphones. org/how-cell-phone-works. hypertext markup language gt ; .

Prince Hall Essay Example | Topics and Well Written Essays - 250 words

Prince Hall - Essay Example (Alexander & Rucker 243). Yet, in 1791, through the help of the British order, Hall became North America’s provincial grand master. Through his acquired power, Hall started to approve African American lodges in other cities in the U.S., like Providence, Philadelphia, and New York (Alexander & Rucker 243). The Prince Hall Masonic organizations tried to enhance community, interpersonal, and personal abilities, and to uphold charity, open-mindedness, and promote the wellbeing of all. Immediately after gaining his freedom, Hall had become a militant and visionary almost soon after as he, together with others, lobbied the Massachusetts Colonial Legislature, encouraging them to abolish slavery in the state. Hall passed away in 1807 and by that time African Masonic groups were spread all over cities in the Midwest and the Northeast, and numerous strong organizations were formed in the Upper South (Alexander & Rucker 243-4). Numerous black lodges were informally called Prince Hall organizations throughout Hall’s

A Generalized Thermodynamic Correlation Based on Three-Parameter Essay

A Generalized Thermodynamic Correlation Based on Three-Parameter Corresponding States - Essay Example Moreover, there are discrepancies existing between the extended and the original correlations’ interface. The main objectives of the paper are the development of the analytical correlations basing on the stated three – parameter corresponding state principle. Also, the work is aimed at covering the whole range of Tr and Pr in the practical application of hydrocarbons processing (Lee and Kesler). Furthermore, the work focuses on the improvement of consistence and accuracy of the pre-existing correlations. The achievement of the above stated objectives was based on the two state equations that are similar to Rubin, Benedict and general fluid reference (Lee and Kesler). In the paper, there is the description of the methodologies that can be efficiently used in the in the representation of the thermodynamic functions and volumetric functions. The description is based on the on the 3-parameter corresponding state principle proposed by Pitzer (Lee and Kesler). The functions referred in the description include fugacity coefficients, densities, enthalpy departures, isochoric and isobaric. The description of the methodologies has resulted in the generation of two equations of state that can be effectively used for reference fluids and the two equations are adequately used to represent both the thermodynamic and volumetric properties of both vapour and fluids as a function of the pre-stated 3-parameters within a range where Tr =0.3 to Tr =0.4 and Pr = 0 to Pr = 10. Using the above stated analytical form, there is an improvement in the representation of the properties at critical regions and within low temperatures (Lee and Kesler). The article concludes that, the stated methods are reliable and due to this; they have found wide applications in various in various conditions. Also, it is connoted that the accuracy of the methodologies can be compared to the original Pitzer correlations,